Greetings Fellow Simmers,
The time has come for the release of the Dash 8 Q400 aircraft and we are as excited as you are for its debut. A lot of work has gone into this aircraft and the result has allowed for additional functionality not only in the Q400 but for any other aircraft that utilizes advanced autopilot features.
The Q400 is released as a free DLC, so be sure to look out for that. There is also an update to the Aerofly FS2 core engine.
Now for the good stuff! Let's begin with a summary of what has been added to this update:
• Updates to the advanced autopilot systems seen in the A320, B737, B747, C90Gtx, Lj45 and now the Q400.
• Fixes to the shimmering buildings and houses seen by some users
• Improvements to the night lighting and a fix to the flickering lights seen at night.
• The ability to now define a user folder in a new location/drive.
• Overhauled auto thrust system
• Added FMS features to the navigation displays of all airliners; example, top of descent, vertical and lateral deviation from flight plan.
• Added crew alerting system (CAS) added to LJ45 and B747 with takeoff configuration warnings, autopilot and auto-throttle disconnect warnings
• Improved the fly by wire of the A320 (this is still a work in progress)
• Modernized A320 displays; more realistic look and greatly increased functionality
• Adjusted flight models
• Updated controls
• added auto-throttle disconnect
Now let's take a look at the Dash 8 Q400:
• Liveries; Austrian Airlines, Canada Express, Flybe, Horizon Alaska, Celebration and Green, Sata, and SkyWork
• full rigidbody simulation of the fuselage, wings, stabilizers, gear and propeller (customary for all Aerofly FS 2 aircraft) with accurate flight model which is fairly close to real world numbers during climb, cruise and descent
• simulated prop wash effects on wing, gyroscopic effects of the large propellers which require a bit of trimming on pitch, yaw and roll axis when power changes
• custom engine physics for the PW150A turboprop engine using real world physics laws and no "lookup table" calculations
• realistic engine shut-down and preliminary failure of other systems with engine off
• engine start; physically accurate simulation with starter connected to high pressure shaft
• engine has realistic heat capacity and cools down when its off
• custom FADEC simulation
• new governor implementation
• custom rendering algorithm for all displays
• glass cockpit functionality
• ARCDU (audio radio control display unit)
• all clickspots have been prepared and are available; most switches already work but not all systems are modeled yet
• a lot of the push buttons are animated to give better feedback
• Updated sounds
There is a lot to be excited about. For a complete and impressive listing of all new features packed into this update visit the change log notes: https://www.aerofly.com/aerofly_fs_2/dokuwiki/doku.php/manual:early_access_changelog#section20170726
Also be sure to thank Jan, Marc, Andreas, and the rest of the IPACS team for the amount of work that they did to provide you with this feature packed update.
Geoconvert Tool Released Today - New Download Section Introduced
Greetings Aerofly FS2 Flight Simulator Community,
We are pleased to inform you that the new geoconvert tool has been released to the public. There is also a new download section added to the forum; this new section is called (created enough) “Downloads”, and is available to all registered Aerofly forum users.
You will notice that this new section will make it easier to find published downloads moving forward.
Simply locate your selection, click on it, and click on the download box to the right.
You will also notice that the SDK has been broken up into separate downloads to make it easier if you just need a portion of the package. You will also notice some additional repaint kits for you as a bonus.
The geoconvert tool is located within the “SDK Tools” package.
Be sure to check out our official Wiki: https://www.aerofly.com/aerofly_fs_2/dokuwiki/ to find detailed instructions on how to use this new scenery creation tool.
Happy Geoconverting !
Q-400 Moves Into Closed Alpha Testing
Greetings Aerofly FS2 Community,
We wanted to provide you with a status update regarding the much anticipated Bombardier Dash 8 Q400 Aircraft. As you are all aware, the Q400 aircraft will have most of the complex systems installed and operational as described by Jan (posted on the official Aerofly FS2 forum page): "Q400 status update - More screenshots!" found here: https://www.aerofly.com/community/forum/index.php?thread/8351-q400-status-update-more-screenshots/
These new systems will not only be isolated to the Q400 aircraft. The updated autopilot system that will be a part of this release will affect all of the FS2 aircraft that have an autopilot system. Due to this, careful testing will be taking place prior to the official release of the Q400.
At this time, i'm pleased to inform you that the Q400 has moved into this closed internal testing. This testing will take as long as it needs to confirm the quality that all of you should expect from IPACS prior to release. Please be patient just a bit longer while we get the Q400 and the new autopilot ready for takeoff.
As always, we wish to thank you for your continued support while development of Aerofly FS2 continues.
ORBX meets IPACS and the result is AMAZING; LOWI and KCGX are here!
Hello Aerofly FS2 Flight Simulator users,
The time has come to witness and experience the brilliant scenery made by the popular ORBX team with Aerofly FS2.
Available now, Aerofly FS 2 users for the first time will be able to fly over the highly detailed ORBX scenery of KCGS- Meigs Field, located on the shores of Lake Michigan and LOWI-Innsbruck (which needs no introduction) recreated in stunning detail.
Both sceneries are available now on ORBX FTX Central and coming on June 17th through Steam DLC.
Here are some features to look forward to:
KCGX-
* 12,000km2 of photoreal imagery!
* Ultra detailed rendition of KCGX Meigs Field circa late 90's and early 2000's
* Extraordinarily detailed interior model of the terminal
* Many highly detailed Chicago landmarks, including Soldier Field, Cloudgate, Adler Planetarium, Navy Pier and The Shedd
* Custom CBD for Chicago skyline including Sears Tower, Aeon Center, Trump Tower, Hancock Center
* Thousands of autogen buildings accurately placed
* Advanced rendering, ambient occlusion and night-lighting
* Airport imagery at 30cm per pixel
* Beautifully modelled static aircraft
* Animated people and ferris wheel
* Unbelievable performance, very high FPS
* Incredible VR experience
* A collaboration between Orbx and IPACS
LOWI-
* Innsbruck Airport recreated in full HD detail
* Full 2500 square km coverage area
* Sloped runway! A key feature of AF FS2
* Ultra-crisp terrain textures.
* Incredible performance on even mid-range systems
* Amazing VR integration: optimized for performance and smoothness, best-in-class.
* Full animation support: Animated people, vehicles and trains
* Complete autogen system - a major new feature previously unseen in Aerofly FS, expertly designed by the team at IPACS.
* Volumetric grass
* Crisp and accurate shadow and lighting engine
* Dozens of landmarks, POI and features, including two heliports.
* Stunning atmospheric engine perfectly suited to VFR flying.
This marks the beginning of the future of advanced flight simulation
Aerofly FS 2 new DLC Utah
Dear Aerofly users,
after a longer break, we have finally published a new DLC. This DLC features the state of Utah with its fantastic region of the Monument Valley. As usual, this DLC features high resolution aerial images for a very detailed scenery. This DLC also offers over new 20 airports, including the Salt Lake City International airport.
Important note: As we have updated many files, this update is a VERY big download, basically updating half of all files in Aerofly FS 2, including existing files of the base package and other DLCs. So beware and be prepared for some longer download times. We apologize for this in advance, but it was a necessary step to simplify the work flow for future updates.
We hope you enjoy this new DLC.
In parallel we are still working on more features and new content, so stay tuned for more updates.
2017-04-03
New DLC featuring the state of Utah
Improved graphics performance and memory usage
Minor bug fixes in the Navigation menu
New Region on Final
Here is a sneak peek of an all new region coming your way shortly. This is a majestic area. Can you guess this new location?
This new region will be in the form of a DLC, and it will be FREE for everyone. Please be a little bit more patient so that this can be finished up.
